Please contact us prior to filling out any rebate forms to see which rebates are available and the requirements needed to receive an incentive payment.
Please Note: Only the following Rebate Forms will be accepted. Certain installations must be done by certified technicians to be eligible for rebates. See our List of Certified Technicians (PDF).
Air Source Heat Pump Rebate
Requirements
To qualify for a rebate, you must meet the following requirements:
- Purchase an Air Source Heat Pump from our PTCS Certified Technicians List. Note: Look for a Heating Season Performance Factor (HSPF) of 9.0 or higher and a seasonal energy efficiency Rating (SEER) of 14.0 or higher – Be sure all specifications on the rebate form are met
- Heat pump upgrades include adding a heat pump to a system with gas back-up, replacing an existing heat pump, or if upgrading from zonal to ASHP
- When more than 50% of the heating system ducts run through unconditioned space, the ducts must be sealed and PTCS certified unless the ducts were previously certified or a PTCS duct leakage test indicated that the pre-existing duct leakage is too low to qualify for the PTCS duct sealing reimbursement
- Install the system in our service territory
- Attach a copy of the invoice listing the manufacturer (brand name), model number, type, size, cost of the system, AHRI certificate, and a copy of the PTCS testing forms
- Have your installer sign this form verifying that it meets the specifications above
Upgrades
- Air-Source Heat Pump
- Commissioning, Controls, and Sizing
- Variable Speed Heat Pump
- Electric Forced-Air Furnace to Variable Speed Heat Pump
- Electric Forced-Air Furnace to Air Source Heat Pump
How the Air Source Heat Pump Works
Apply for an Air Source Heat Pump Rebate
Air Source Heat Pump Installation Agreement
Ground Source/Geo-Thermal Heat Pump Rebate
Requirements
To qualify for a rebate, you must meet the following requirements:
- Purchase a Ground Source Heat Pump from our PTCS Certified Technicians list
- Install the system in our service territory
- The measure is available for single-family homes only
- All system components must be newly installed – The replacement of an existing geothermal unit or the thermal exchange loop or fossil fuel furnaces does not qualify
- Geothermal heat pump systems must be ENERGY STAR qualified and installed according to the IGSHPA specifications available at the time of installation by a PTCS and IGSPHA-certified technician
- Read the agreement form for a complete listing of qualifications necessary to qualify for the rebate
- The installer must fill out a rebate form and submit it to Ravalli Electric Co-op and PTCS
Apply for a Ground Source/Geo-Thermal Heat Pump Rebate
Geo-Thermal/Ground Source Heat Pump Installation Agreement
Heat Pump Water Heater
Requirements
- Heat Pump Water Heater (HPWH) must be listed on the BPA Qualified Products List (PDF)
- HPWH must be Tier 4 model
Installed to manufacturer’s specifications – - The installer must have received installation training from the manufacturer (if available)
- The installer must submit a completed and signed rebate form
- In addition, must provide an invoice with the manufacturer, model number, size, and quantity of equipment installed – Also, the purchase date and cost of HPWH
Thank you for your participation in this important program.
All programs are limited and subject to change based on the availability of funds.